13/14
PSE 1400-6000 60Hz
English
6.4 Dismantling
The refrigerant and the lubricating oil contained in the circuit must be recovered in conformity with cur-
rent local environmental regulations.
%
Recycling Disposal Z
structural work steel/epoxy-polyester resins
exchanger aluminium
pipes/headers copper/aluminium/carbon steel
drain polyamide
exchanger insulation EPS (sintered polystyrene)
pipe insulation synthetic rubber
compressor steel/copper/aluminium/oil
condenser copper/aluminium
refrigerant R513A
valves brass
electrical cables copper/PVC
Equipment containing electrical components must
be disposed separately collected with electrical
and electronic waste according to local and cur-
rently legislation.
To Next Page
Loading...
