8
3.1 Display mode
The actual pressure (ACT) is indicated in the display mode. The
ACT measured value is displayed in the corresponding unit. The
MIN, MAX or FS values is indicated in the lower part of the dis-
play.
Display Description
Bar graph Graphic indication of the actual pressure.
A pressure peak is indicated by means of a pixel
(graduation mark).
The indicated value is refreshed at intervals of
50 ms (20 measurements/s).
ACT Indicates the actual pressure.
The indicated value is refreshed at intervals of
300 ms (3 times/s).
MIN/MAX Indicates the MIN, MAX or FS value according
to setting.
The indicated value is refreshed at intervals of
300 ms (3 times/s).
FS Upper limit of the scale (e.g. 400 bar).
Units Indicates the chosen unit.
To Next Page
Loading...
