Parker SensoControl ServiceJunior Series - Resetting the Zero Point Correction; Automatic Power off

17
ENGLISH
5.9 Resetting the zero point correction
Turn off the device. Zero point correction is no longer
active when the device is turned off and on again.
5.10 Automatic power off
Press
for 2 seconds.
Depending on the device configuration, two different displays are
possible:
Auto Power Off Continuous operations
PO On PO OFF
Press
. Auto Power Off is Press . The device must
activated after 5 minutes. be turned off manually.
The settings Auto Power Off or Continuous operations
remain stored and are active when the device is turned
off and on again.