Need help?Do you have a question about the Parker SensoControl and is the answer not in the manual?
General| Series | SensoControl |
|---|---|
| Application | Industrial Applications |
| Measured values | Pressure |
| Display | LCD |
| Measurement Range | 0-10 bar to 0-600 bar (depending on model) |
| Accuracy | ±0.5% FS |
| Housing Material | Stainless steel |
| Protection Class | IP65 |
Adherence to specifications for correct functioning and safety warnings for potential malfunctions.
Information on sending and receiving data via a bidirectional wireless interface and potential interferences.
Explanation of the fast scanning rate for peak capture and data saving principles.
Instructions for turning off the device and safely replacing the batteries, ensuring correct polarity.
Guidance on accessing and navigating through menu functions for device setup and configuration.
Procedure for powering on the device, including self-test and display modes.
Instructions for briefly pressing the ON/OFF key to switch off the device.
Manually correcting the zero point to account for deviations when no system pressure is applied.
To Next Page
