9
Indicates the battery status (5 segments).
REC REC flashes when recording measurement val-
ues (optional data logging function).
x10 Indicated value (actual indication and MIN/MAX
indication) x10.
3.2 Menu functions
The following settings can be made in the MENU function:
● Auto Power Off – on or off
● Unit selection (bar, mbar, PSI, kPa, Mpa)
Press the MENU key for 2 seconds to activate the functions menu.
Press the MENU key again to select the next function.
Press the OK key to save the function setting.
The device then switches to the display mode.
To Next Page
Loading...
