Parker SensoControl ServiceJunior Series - 6 Technical Data 1

21
ENGLISH
6Technical data
Version – Digital pressure gauge with ACT - MIN and
MAX Display
– bar graph display 33 segments
(with peak and hold function)
–4
1
/
2
digit LC display (15 mm)
with back light illumination
– Battery powered with low power electronic
system
– Life time cycle 1,500 h
(No back light function)
Pressure port stainless steel 1.4404
–
1
/
4
" BSPP (ISO 1179-2) or 7/16-20 UNF
(ISO 11926-2/3)
Input – Ceramic Sensor cell
-1…16 bar
– Strain Gauge Cell
0…100/400/600/1,000 bar
– Scan rate 10 ms
– Resolution 12 bit = 4,096 steps
– Accuracy ± 0.25 % FS typ.
± 0.5 % FS max.
Housing Ø = 79 mm; T = 33 mm
Zinc Die Cast with Rubber Protection TPE
Sealing Standard NBR sealed
Viton
®
(FKM); EPDM on request