Parker SensoControl - Switch off (OFF); Back Light Function; MIN;MAX Display; FS Full Scale Display

page 7
5.2 Switch off (OFF)
ON
OFF
Press key (quick)
5.3 Back light function
ON
OFF
Hold down the key (2 sec).
The back light illumination will be switched off after 30 sec.
5.4 MIN/MAX Display
The additional display line can be switched to MIN/MAX or FS format.
The scroll function indicates MIN / MAX after the other.
To measure pressure peaks the MIN/MAX Function is in use. The MIN/MAX memory saves the highest
(MAX) and the lowest (MIN) reading. Switching off the instrument, the MIN/MAX memory will be erased.
When running different pressure tests one after another, the MIN/MAX memory should be deleted
(RESET) after every test cycle.
MIN
MAX
FS
MIN / MAX and FS appears in display
5.5 FS Full Scale Display
The FullScale display helps to read out the bar graph indication.
After MIN and MAX FS appears.
The full scale value will be displayed numerically.
MIN
MAX
FS
FS appears in display
5.6 Delete MIN/MAX readings

OK
MIN/MAX readings deleted