Parker Serviceman Plus - Error messages

19V1.0/02/12
Error messages
5. Error messages
Display Description Solution
ERROR 1 Internal device error Conrm by clicking <OK>. If this occurs frequently,
please return the unit for repair.
ERROR 2 Memory error Conrm by clicking <OK>. If this occurs frequently,
please return the unit for repair.
USB ERROR Error when saving to the USB ash drive USB ash drive is full, defective or not compatible.
Please use only USB ash drives that conform to the
Technical Specications (see page 23).
USB FULL ERROR The USB ash drive is full Delete les on the USB ash drive or use a new one
FIRMWARE
ERROR
The rmware update has failed. This occurs when
the transfer of a new rmware from the USB ash
drive failed.
Conrm by clicking <OK>. If this occurs frequently,
please return the unit for repair.
CAN ERROR CAN initialization failed. Unknown CAN sensor, or
more than three CAN sensors connected
Please make sure you are only using Parker CAN
sensors and connecting no more than three sensors.