3V1.0/02/12
Contents
Contents
Foreword ................................................................ 2
Revisions .......................................................................... 2
Contact addresses ...........................................................2
1. Safety notes / product selection ....................4
1.1 Approved and intended use ..................................4
1.2 Skilled personnel ..................................................4
1.3 Accuracy of the technical documentation .............4
1.4 High-pressure applications ..................................4
1.5 Service and repair ................................................. 5
1.6 Notes on disposal .................................................5
2. Hardware version / scope of delivery / up-
dates ..............................................................6
2.1 Updates – updating the instrument's rmware ......6
3. Connecting the sensors .................................8
3.1 SCM-155-0-02 with Parker analogue inputs .........8
3.2 SCM-155-2-05 with Parker CAN sensors .............9
3.3 Using the SCMA-VADC-600 current-voltage
converter ............................................................. 11
3.4 Using the SCMA-FCU-600 frequency converter . 11
4. Instrument settings ..................................... 11
4.1 RESET – reset the MIN and MAX values ...........11
4.2 DISP – display the current readings, MIN, MAX
values, sensor limit value or temperature. .........12
4.3 SORT – reorder the channels in the display .......12
4.4 SORT RESET – reset to the factory default
sorting .................................................................13
4.5 CALC – insert the calculating channel ................13
4.6 SET – basic instrument settings .........................14
4.7 START / STOP – saving the measurements .......15
4.8 Saving measurements in internal memory .........16
4.9 Online measurements using the PC software ....16
4.10 ZERO – calibrate for offset error .........................17
5. Error messages ........................................... 19
6. Maintenance, cleaning and repair ...............20
6.1 Notes on maintenance and calibration ...............20
6.2 Repair .................................................................20
7. Accessories ................................................. 21
7.1 Accessories and spare parts for both versions ...21
7.2 Analogue sensors (with automatic sensor
detection) and connecting cable .........................21
7.3 CAN-bus sensors (with automatic sensor ID)
and connecting cable ..........................................22
8. Technical data ..............................................23
To Next Page
Loading...
