EN | Operating manual For your own safety
WVM 45 -1450 9
Danger zones at the dryer
1
2
3
4
5
6
7
1,6
Risk of injury from hot vessel and
piping surfaces
4
Risk of injury by suddenly escaping gas
2
Risk of injury by high voltage
5
Risks of injury by hot regeneration air
ow
3
Risk of injury from crushing by shaft
during switching
7
Risk of injury by blocked silencer
Symbol Danger zone
Excess pressure warning
The entire dryer is under pressure. Air that is suddenly released through expansion
and relief valves can lead to serious injury.
Hot surfaces
During operation, certain surfaces of the dryer reach temperatures above 120 °C.
At insulated dryers, screw/ anged connections might protrude from the insulation.
Voltage
Various parts of the dryer are live. These components may only be connected,
opened and serviced by authorised technical personnel.
Risk of slipping
During the emptying and lling of the vessels, there is a risk of injury from slipping
on spilt desiccant.
Risk of crushing
At the universal shaft and the drives, there is a risk of injury from crushing during
the switching from absorption to regeneration.
To Next Page
Loading...
