EasyManuals Logo

Parkside Performance PABSP 20-LI A1 User Manual

Parkside Performance PABSP 20-LI A1
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13 GB/IE/NI
can also be used to drill into plastics. Start with
a 3 mm diameter drill bit and then increase the
size until the desired hole diameter is achieved.
Drilling in wood:
Use a wood drill with a lathe centre; for deep
holes, use an auger bit; for large-diameter
holes, use a Forstner bit. Small screws can be
screwed directly into soft wood.
On-board bit storage:
Drill bit and screw bit can be stored here
temporarily
Belt clip:
The belt clip allows the tool to be hooked on
belt or pocket as shown.
Maintenance and cleaning
RISK OF INJURY! Always
switch the product off and remove the battery be-
fore carrying out any work on the product.
The product is maintenance-free.
Never allow liquids to get into the product
Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
The product must always be kept clean, dry
and free from oil or grease.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities. The Green
Dot is not valid for Germany.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal au-
thority for more details of how to dis-
pose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Remove the battery from the unit before disposal.
Faulty or used batteries / rechargeable batteries
must be recycled in accordance with Directive

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside Performance PABSP 20-LI A1 and is the answer not in the manual?

Parkside Performance PABSP 20-LI A1 Specifications

General IconGeneral
Voltage20 V
Battery TypeLi-Ion
Max Torque60 Nm
Chuck Size13 mm
Speed Settings2
Torque Settings21 + 1 drill setting

Related product manuals