6 GB/IE/NI
List of pictograms used
Read the instruction manual.
T3.15 A
Fuse
Follow the warnings and safety notes!
Protect the rechargeable battery
from water and moisture
Protect the rechargeable battery
from heat and sunlight
Protection class II (double insulation)
Protect the rechargeable battery
from fire
V
Volt (alternating current)
Use in dry indoor rooms only.
V
Volt (direct current)
Cordless Drilldriver 20V
PABSP 20-Li A1
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety in-
formation and instructions for use. Only use the
product as described and for the specified applica-
tions. If you pass the product on to anyone else,
please ensure that you also pass on all the docu-
mentation with it.
Intended use
This product is designed for screwing and drilling
into wood, metal and plastic materials. Use the
product only as per described and for the applica-
tions be specified. Any other usages of or modifica-
tion of the tool are deemed to be improper use and
it carries significant risk of accidents and personal
injury. The manufacturer accepts no responsibility
for damage(s) that is caused by misuse. This prod-
uct is not intended for commercial use.
Description of the parts
1
Keyless chuck
2
Torque selection ring
3
Gear speed selector
4
Rotational direction switch / lock
5
On / Off switch / speed control
6
Soft grip handle
7
Magnetic bit holder
8
Belt clip
9
Battery pack
10
Battery level button
11
Release button
12
Battery level indication light
13
LED work light
14
Fast charger
15
Charge status LED – Green
16
Charge status LED – Red
Included items
1 cordless drilldriver 20V PABSP 20-Li A1
1 battery pack PABSP 20-Li A1-1
To Next Page
Loading...
Need help?
General
