Parkside Performance PSBSAP 20-Li C3 User Manual

GB
MT
41
Translation of the original EC declaration of
conformity
Product: Cordless Impact Driver
Model: PSBSAP 20-Li C3
Serial number: 000001–077000
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2006/42/EC • 2014/30/EU • 2012/19/EU •
 2011/65/EU &(EU)2015/863
Product with battery SmartPAPS204 A1/
SmartPAPS208 A1: 2014/53/ EU
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment.
To ensure conformity, the following harmonised standards and national standards and
regulations have been applied:
EN 62841-1:2015/A11:2022
EN 62841-2-1:2018/A11:2019 •EN IEC 63000:2018
EN IEC 55014-1:2021 •EN IEC 55014-2:2021
IEC 62471:2006 •EN 62471:2008
Product with battery SmartPAPS204 A1/SmartPAPS208 A1:
EN 301 489-1 V2.2.3:2019 •Draft EN 301 489-17 V3.2.5:2022
EN 300 328 V2.2.2:2019 •EN 50663:2017
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
21.08.2023
Christian Frank
Authorised representative of documentation

Parkside Performance PSBSAP 20-Li C3 Specifications

General

Battery Voltage	20 V
Torque	180 Nm
Impact Rate	0-3600 bpm
No-load Speed	0-2900 rpm
Chuck	1/4" Hex
Battery Type	Li-Ion
Max Torque	180 Nm
Weight	1.3 kg