What to do if Parkside MPKZ 2000 A1 Saw motor makes excessive noise?
If your Parkside Saw motor is making excessive noise, it could be due to damaged coils or a defective motor. Arrange for inspection of the motor by a specialist.
How to troubleshoot Parkside MPKZ 2000 A1 motor that starts up slowly?
If your Parkside Saw motor starts up slowly and doesn't reach operating speed, it could be due to voltage being too low, damaged coils, or a burnt capacitor. Contact an electrician to check the voltage. Arrange for inspection of the motor by a specialist. Arrange for replacement of the capacitor by a specialist.
What to do if Parkside MPKZ 2000 A1 motor does not work?
If your Parkside Saw motor does not work, it may be due to a defective motor, cable, or plug, or the main breaker being switched off. Check fuses and replace as necessary. Arrange for inspection of the machine by a specialist. Never repair the motor yourself.
General warnings and instructions for safe power tool operation.
Guidelines for maintaining a safe work environment and preventing accidents.
Precautions regarding electrical connections and grounding to prevent shocks.
Verifies the function of the safety guard for user protection.
Steps for assembling and setting up the mitre saw.
Step-by-step guide for replacing the saw blade safely.
General| Power | 2000 W |
|---|---|
| Rated Voltage | 230 V ~ 50 Hz |
| No-Load Speed | 5000 min⁻¹ |
| Cutting Depth at 45° | 45 mm |
| Saw Blade Diameter | 210 mm |
| Weight | 4.2 kg |
| Saw Blade Bore | 30 mm |
| Laser Class | 2 |
| Laser Wavelength | 650 nm |
| Protection Class | II |
| Max cutting depth at 90° | 65 mm |
To Next Page