Parkside PAS D5 - Eccentric Attachment

38 GB
Level Torque (N m)
1 0.44
2 0.48
3 0.53
4 0.60
5 0.65
6 0.70
7 0.78
8 1.20
9 2.30
10 3.40
 Listed driving torque value is measured by static load test
method. This is the maximum torque to drive the screw into wood
corresponding to level 1‒10.
NOTE: These are approximate values for reference only. Do not
rely only on this data when high accuracy is required.
 Eccentric attachment
(Fig.H)
Use the eccentric attachment
[] for tightening and loosening screws
that are close to the ceiling or an adjacent wall.