Parkside PAS D5 - Switching On;Off; Cleaning and Maintenance

42 GB
 Switching on/off
Switching on/off Action
On
Press the switch trigger
[7] and hold it
in place.
The LED work light
[8] lights up.
Off
Release the switch trigger
[7].
The LED work light
[8] goes off.
 Cleaning and maintenance
 Before cleaning or carrying out any maintenance:
– Set the rotation direction switch
[5] to the middle position. This
prevents unintentional switching on.
– Remove the USB cable
[].
– Remove the bit
[], the magnetic bit holder[] or any of the
attachments
[] [] [] [].
– Disconnect the charger
[] from the socket‑outlet.
 Never allow fluids to get into the product.
 The product must always be kept clean, dry and free from oil or
grease.
Remove debris from it after each use and before storage.
 Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
 Clean the product with a dry cloth. Use a soft brush for areas
that are hard to reach.