Parkside PAS D7 - Safety Instructions

11GB/IE/NI
Information Value
Output voltage: 5.0 V
Ouput current: 1.7A
Output power: 8.5W
Average active
eciency: 78.2%
No-load power
consumption: 0.07W
Input current: 0.3A
Protection class:
II/
(double
insulation)
Connection type: USB Type A
Charging time: approx. 60min
* Charger is not included, the charger
is available via telephone (see
“service”).
Recommended ambient temperature
While charging: +4 to +40 °C
During operation: 0 to +40 °C
During storage: 0 to +50 °C
Noise emission value
The measured values have been
determined in accordance with
EN 62841. The A-rated noise level of the
power tool is typically as follows:
Sound pressure
level: L
pA
= 60.37 dB(A)
Sound power
level: L
WA
= 71.37 dB(A)
Uncertainty K: K
pA/WA
= 3 dB
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Screw driving
Vibration emission
value a
h
:
= < 2.5 m/s
2
(0.215 m/s
2
)
Uncertainty K: = 1.5 m/s
2
NOTE
u The declared vibration total value
and the declared noise emission
value have been measured in
accordance with a standard test
method and may be used for
comparing one tool with another.
u The declared total vibration
value and the declared noise
emission value may also be used
for a preliminary assessment of
exposure.
m
WARNING!
u The vibration and noise emissions
during actual use of the power tool
can dier from the declared values
depending on the manner in which
the tool is used, especially what
kind of workpiece is processed.
Try to minimise exposure to
vibration and noise. Examples
of measures to reduce vibration
include wearing gloves when
using the tool and limiting working
time. All parts of the operating
cycle must be taken into account
(e.g. times when the power tool is
switched o and when it is running
idle in addition to the trigger time).
Safety instructions
 General power tool safety
warnings
m
WARNING!
u Read all safety warnings,
instructions, illustrations and
  
this power tool. Failure to follow
all instructions listed below may
result in electric shock, re and/or
serious injury.