EasyManua.ls Logo

Parkside PAS D7 - Page 17

Parkside PAS D7
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15GB/IE/NI
d) S    
if the tool blocks while in use. Be
prepared for high reaction moments
as these can cause kickback.
e) While working on the appliance,
transporting it or storing it, always
set the rotation direction switch
to the central position (lock
position). This prevents the power
tool from starting up unintentionally.
Safety guidelines for using
cutting attachment
Keep your hands clear of the cutting
area and the cutting blade.
Before carrying out any work on the
appliance, ensure that the rotation
direction switch is in the middle. This
prevents unintentional switching on.
Do not cut unless the blade guard
is fully functional. Defective blade
guards will not protect you against
unintentional contact with the cutting
blade.
Before each use, check whether the
blade guard is in perfect condition
and that the cutting blade is rmly
tted.
Always use cutting blades of the
correct size and with an appropriate
central xing bore.
Vibration and noise
reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Use correct accessory tools for the
product and ensure they are in good
condition.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate).
Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will
help to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
Switch the product o and
disconnect it from the mains if there
are malfunctions.
Have the product checked by a
qualied professional and repaired,
if necessary, before you operate it
again.
Battery charger safety
warnings
This appliance can
be used by children
aged from 8 years and
above and persons
with reduced physical,
sensory or mental
capabilities or lack
of experience and

Table of Contents

Related product manuals