Parkside PMB 1100 A1 - English; Default Chapter; Table of Contents

PMB 1100 A1
GB
│
IE
│
NI
│
1 ■
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical specifications ....................................................... 2
General power tool safety warnings .................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 3
3. Personal safety ............................................................ 4
4. Power tool use and care .................................................... 4
5. Service .................................................................. 5
Additional safety instructions for band saws ....................................... 5
Original accessories/auxiliary equipment ......................................... 5
Before use .......................................................5
Assembly .................................................................. 5
Making settings ............................................................. 6
Changing the saw blade ...................................................... 6
Use .............................................................7
Switching the appliance on and off .............................................. 7
Switching the work lamp on and off .............................................. 7
Setting rotational speed ....................................................... 7
Working procedures .......................................................... 7
Cleaning and maintenance .........................................7
Disposal .........................................................8
Kompernass Handels GmbH warranty ...............................8
Service ..........................................................9
Importer ................................................................... 9
Translation of the original Conformity Declaration .....................10