Parkside PNTS 1400 E2 User Manual (English)

Other manuals for Parkside PNTS 1400 E2

Questions and Answers:

L
lfloresAug 17, 2025
Why Parkside PNTS 1400 E2 Vacuum Cleaner has low suction?
- A
  Angela FreemanAug 17, 2025
  Low suction in your Parkside Vacuum Cleaner can occur due to several reasons: a blocked hose system or jets (remove obstructions); incorrect assembly of the suction pipe (assemble correctly); an open container (close it); a full container (empty it); a full or clogged filter (empty, clean, or replace it); a float in the filter basket that does not move (release the float); or a faulty float in the filter basket (repair by Customer Care).
S
Sara BradshawAug 20, 2025
Why does my Parkside PNTS 1400 E2 have low suction?
- S
  Stacey GriffinAug 20, 2025
  If your Parkside Vacuum Cleaner has low or no suction, several factors could be responsible. Start by checking if the hose system or jets are blocked and remove any obstructions. Ensure the suction pipe is correctly assembled and the container is properly closed and not full. Also, examine the filter; if it's full or clogged, empty, clean, or replace it. Finally, check if the float in the filter basket moves freely; if not, release it. If the float is faulty, it requires professional repair by Customer Care.
F
Frank Wilson Jr.Aug 22, 2025
What to do if my Parkside PNTS 1400 E2 does not start?
- L
  Lauren PopeAug 22, 2025
  If your Parkside Vacuum Cleaner isn't starting, the issue might be due to several factors: no mains voltage (check the plug socket, cable, line, plug, and fuse, repairing as needed through an electrical specialist); a defective on/off switch (repair by Customer Care); worn carbon brushes; or a defective motor.
W
williamsspencerAug 26, 2025
Why is my Parkside Vacuum Cleaner blowing out dust?
- E
  Ellen WebbAug 26, 2025
  If dust or dirt is being blown out of your Parkside Vacuum Cleaner, the filter may be missing or not correctly assembled. Ensure all filters are present and properly positioned.
C
christiansmithAug 28, 2025
Why is my Parkside Vacuum Cleaner not sucking?
- N
  Nichole DavenportAug 28, 2025
  There could be several reasons for low or no suction in your Parkside Vacuum Cleaner. The hose system or jets might be blocked; clear any obstructions. Ensure the suction pipe is correctly assembled. Check if the container is open and close it, or if it's full, empty it. The filter might be full or clogged; in that case, empty, clean, or replace the filter. Also, ensure the float in the filter basket moves freely; if not, release it. If the float is faulty, it requires repair by Customer Care.
A
Amber EdwardsAug 31, 2025
What to do if the float does not switch off the Parkside PNTS 1400 E2 Vacuum Cleaner?
- J
  Jamie RiveraAug 31, 2025
  If the float in your Parkside Vacuum Cleaner isn't switching off the appliance, it could be because the float in the filter basket does not move (release the float) or the float is faulty (repair by Customer Care).
M
Michelle ThomasSep 3, 2025
Why is dust blowing out of my Parkside PNTS 1400 E2 Vacuum Cleaner?
- J
  Jackie CamposSep 3, 2025
  If dust or dirt is blowing out of your Parkside Vacuum Cleaner, it is likely that the filter is either missing or not assembled correctly. Install any missing filters or check the correct position of the filter.
B
barberbrandonSep 5, 2025
How to fix a Parkside PNTS 1400 E2 Vacuum Cleaner that won't start?
- A
  Andrew HallSep 5, 2025
  If your Parkside Vacuum Cleaner isn't starting, there could be a few reasons. First, check the mains voltage by inspecting the plug socket, cable, line, plug, and fuse. If any of these are defective, have them repaired by an electrical specialist. A defective on/off switch requires repair by Customer Care.
I
ian54Sep 8, 2025
What to do if the float in my Parkside PNTS 1400 E2 does not switch the appliance off?
- L
  laurenwarnerSep 8, 2025
  If the float in your Parkside Vacuum Cleaner isn't switching the appliance off, the float in the filter basket may not be moving. Try releasing the float. If the float is still faulty after this, it requires repair by Customer Care.
M
Mark Mckinney MDSep 12, 2025
What to do if my Parkside Vacuum Cleaner won't start?
- E
  erinwalkerSep 12, 2025
  If your Parkside Vacuum Cleaner isn't starting, the issue might be with the power supply. Check the plug socket, cable, line, plug, and fuse. If any of these are defective, have them repaired by a qualified electrician. A defective on/off switch also can be a reason, in that case contact Customer Care. Other potential causes include worn carbon brushes or a defective motor.