Why is there low or lack of suction in my Parkside PNTS 1300 E4 Vacuum Cleaner?
- NNicole WallaceJul 28, 2025
If your Parkside Vacuum Cleaner exhibits low or no suction, several factors could be responsible. Check for blockages in the hose system or jets and remove any obstructions. Ensure the suction pipe is correctly assembled. Verify that the container is closed and not full; empty it if necessary. Also, inspect the filter; if it's full or clogged, empty, clean, or replace it. Lastly, check the float in the filter basket; if it's incorrectly positioned, switch the equipment off so the ball drops, then switch it on again. If the float is faulty, it requires repair by Customer Care.