9
GB IE NI CY
Assembly
Pull out the mains plug.
from electric shock.
1. Attach the carrying handle
feet using the cross-head screws
15),
16) for dry
vacuuming,
17).
close it
-
sories.
Operation
13) before commencing work.
Switching on/off
Connect the mains plug.
Switching on the vacuum:
3) in position “I”.
Switching off the vacuum:
3) in position “O”.
Nozzle usage
Floor nozzle ( 18) with insert at-
tachment ( 19):
for wet and dry vacuuming of smooth sur-
Floor nozzle ( 18) without insert
attachment ( 19):
and for removing persistent dirt.
• Press the clips on the right and left side
18) and remove
19).
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle ( 20):
for vacuuming gaps, corners and radiators.
Wet vacuuming
1. For wet vacuuming or to vacuum wa-
- Before inserting, twist the edge of
13) on the handle
14) into the water tank and suc-
tion up the water.
3. Empty the waste container immediately
after vacuuming because it is not de-
Maintenance”).
Never reach into the water to
be suctioned up. Danger of
electric shock.
To Next Page
Loading...
