GB MT
24
Further safety directions
a) Hold the power tool by the
insulated handle grips when
performing work in which the
screw may come into contact
with hidden wiring.
were to come into contact with a live
electrical cable, metal parts of the ap-
pliance could also become live and
cause an electric shock.
b) Keep hands away from rotating
parts. Wait until the power tool
has stopped before placing it
down.
c) Avoid contact with the tool insert
or the component part immedi-
ately after processing.
d) Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part.
e) Secure the workpiece. A work-
piece that is retained with clamping
appliances or a vice is held more se-
f) In case of soft materials such as
aluminium or similar, using the
impact wrench can damage the
thread or screw seat if screwed
too tight.
g) Protect yourself and others,
including people in the immedi-
ate vicinity, with the necessary
safety measures or precautions
to prevent damage to health.
h) Do not use any accessories
that are not recommended by
PARKSIDE.
Caution! Observe the safety
information and notes on
charging and proper use as shown
in the instruction manual for your
battery and charger of the X 12 V
Team series from Parkside. A de-
tailed description of the charging
process and further information can
be found in the separate operating
instructions.
Residual risks
electric tool, some residual risks will remain.
Due to its construction and build, this electric
surfaces.
-
tection.
operating the appliance for longer pe-
riods of time or if the unit is not held or
Warning! During operation, this
electric tool generates an electro-
reduce the risk of serious or lethal injuries,
we recommend that persons with medical
implants consult their doctor and the manu-
facturer of their medical implant before
operating the machine.
To Next Page
Loading...
Need help?
General
