GB MT
26
Working Instructions
selected speed and impact duration.
wrench which is set to the target
must be checked in all cases with a
instructions for tightening screws
guidelines for the inspection of
screws or nuts in accordance with
time or performance.
After a wheel change is carried
an inspection of the wheel bolts or
-
50 to 100 km.
Attach extension
(optional)
(not included in package) onto the tool
holder (1).
the extension (*).
the extension (*).
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not
immerse it in water.
Electric shock hazard!
motor housing (2) and handle (6) of the
appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
-
age the appliance.
Storage
of reach of children.
To Next Page
Loading...
