9
1. Check that the parallel stop (3) is mounted
correctly before use.
2. Ensure that there is a sufficient electricity
supply for the jigsaw in accordance with the
information provided by the manufacturer.
3. Switch the jigsaw on.
4. Carry out a cut both with and without the
parallel stop (Fig. F and G).
5. Switch the jigsaw off immediately after use.
6. Cut off the power supply to the jigsaw.
7. Unmount the jigsaw from the product.
8. Unmount the product from the work table.
Storage, cleaning
When not in use, always store the product
clean and dry at room temperature. Wipe
clean with a dry cloth only.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Disposal
Dispose of the product and packaging
materials in accordance with current
local regulations. Store the packaging
materials (foil bags, for example) out of
the reach of children. For further information
about disposal of the product no longer needed,
contact your local council. Dispose of the
product and the packaging in an environmental-
ly friendly manner.
The Recycling Code distinguishes
different materials to be returned for
recycling. The Code consists of the
recycling symbol for the recycling process and a
number that identifies the material.
Service handling
IAN: 445896_2307
Service Great Britain
Tel.: 0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1800 101010
E-Mail: deltasport@lidl.ie
GB/IE
To Next Page
Loading...
