Parkside PTBM 500 E5 - EC Declaration of Conformity

61
IE
NI
CY
Translation of the original EC
declaration of conformity
We hereby conrm that the
Bench pillar drill
Design Series PTBM 500 E5
Serial Number
000001 - 093500
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2014/30/EU • 2011/65/EU* • (EU) 2015/863
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 61029-1:2009/A11:2010 • EN ISO 12100:2010
EN 55014-1:2017 • EN 55014-2:2015
EN 61000-3-2:2014 • EN 61000-3-3:2013 • EN 61010-1:2010
EN 60825-1:2014 • EN IEC 63000:2018
This declaration of conformity is issued under the sole responsibility of the manufactu-
rer:
Christian Frank
( Documentation Representative )
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
GERMANY
05.11.2020
* The object of the declaration described above satises the provisions of Directive 2011/65/EU of
the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful sub-
stances in electrical and electronic appliances.