Parkside PTK 2000 C3 - Translation of the Original EC Declaration of Conformity

33
GB
IE
Christian Frank
Documentation Representative
Translation of the original EC declaration of conformity
We hereby conrm that the
Table circular saw
Design Series PTK 2000 C3
Serial number 201703000001 - 201703042700
conforms with the following applicable relevant version of the EU guidelines:
2006/42/EC • 2014/30/EU • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national standards and stipulations have been
applied:
EN 61029-1:2009+A11:2010 • EN 61029-2-1:2012
EN 55014-1:2006+A2:2011 • EN 55014-2:1997+A2:2008
EN 61000-3-2:2014 • EN 61000-3-11:2000
EN ISO 12100:2010 • EN 61010-1:2010
EN 60825-1:2007 • EN 61000-6-1:2007
EN 61000-6-3:2007 • EN 847-1:2013
Registered Ofce: TÜV Süd, NB 0123
Design Type Certicate No.:
M6A 17 03 36607 326
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
30.04.2017
* The object of the declaration described above satises the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8
June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.
NI