EasyManua.ls Logo

Parkside PWBM A1 - Start charging

Parkside PWBM A1
125 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52 GB/IE
If the battery status LED [3] lights up red during use, the battery is at less
than 30 % of its capacity and needs to be charged.
Never charge the product when the ambient temperature is below
+4 °C or above +40 °C. The storage climate should be cool and dry
and the ambient temperature should be between 0 °C and +50 °C.
This product has a built-in rechargeable battery which cannot be
replaced by the user. The removal or replacement of the rechargeable
battery may only be carried out by the manufacturer or his customer
service or by a similarly qualified person in order to avoid hazards.
When disposing of the product, it should be noted that this product
contains a rechargeable battery.
Start charging
(Fig. B)
Connect the USB cable [] to the USB port (Type A) [] of the charger
[].
Connect the other end of the USB cable [] to the USB Type C socket
[6].
Connect the charger [] to a socket-outlet.
The battery status LED [3] shows the charging status:
Battery status LED [3]
Charging status
Red Charging
Green Battery is charged up
NOTE: It is normal for the handle to warm up slightly whilst charging.

Table of Contents

Related product manuals