53GB/IE
Stop charging
Disconnect the USB cable
[]
from the product.
Disconnect the charger
[]
from the socket-outlet.
Changing rotary direction
Push through the rotation direction switch [5] to set the rotary direction
(Fig. C):
Switch pushed from Direction Direction indicator
Right
(b)
Tighten screws
[2]
Left
(a)
Loosen screws
[4]
Safety lock
Set the rotation direction switch [5] to the middle position so that it protrudes
equally on both sides. The switch trigger [7] cannot be pressed in this
setting.
Changing bits
Pull out the bit. Insert another type of bit into the bit holder [1] (Fig. D).
NOTE: Screw bits are labelled according to their dimensions and their
shape. If you are unsure, always try the particular screw bit out to see
whether it sits in the screw head without any free play.