7GB/IE/NI
Intended use
This drywall sander (hereinafter “product” or
“power tool”) is suitable for the following tasks:
Surface preparation before painting/
wallpapering:
– Sanding primed or plastered drywall
– Sanding wooden (natural timber or
plywood) wall and ceiling
Removing unwanted waste materials:
– Carpet residue
– Paint coatings
– Coverings/adhesives
– Loose plaster
Do not use the product for the following tasks:
Removing wallpaper
Cutting or sanding metal
Roughing or polishing works
Sanding materials containing asbestos
Do not use the product in a wet environment.
Do not use the product together with wire brushes
or similar type of accessories.
Always use the correct type of sanding paper
according to the intended use. Observe
the technical requirements of this product
(see “Technical data” and “Selecting sanding
paper”) when purchasing and using sanding
paper.
The LED work light on this product is intended to
illuminate the immediate work area.
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries
and damage. The manufacturer is not liable
for any damages caused by improper use. The
product is exclusively intended for domestic use.
The product is not intended for commercial use,
industrial operations or similar purposes.
Observe all applicable local safety regulations,
standards and ordinances. The use of noise
emitting power tools may be restricted to certain
times by national or local regulations.
Scope of delivery
m
WARNING!
u The product and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1x Drywall sander PWDS 920 B2
1x Telescopic extension shaft
1x Vacuum hose
2x Vacuum hose adaptor
(1 adaptor is pre-installed on the vacuum
hose)
6x Sanding paper
(Grit size: #80, #100, #120, #150, #180,
#240)
1x Screwdriver
1x Hex key
2x Spare carbon brush (1 pair)
1x Instruction manual
To Next Page