7GB
Intended use
This product is suitable for measuring wind speed and air
temperature. The wind speed can be displayed in 5different
units (m/s, km/h, ft/min, knots, mph). The temperature can be
displayed in °C or °F. The readings are displayed on an LCD
screen. The LCD screen features a backlight, which can be
switched on and off.
The product features the following functions:
Display of maximum, 2/3 of maximum, minimum or
average readings
Automatic power-off function
Hold function (freeze values on the display)
The product can only be used in a dry and dust-free
environment. The product is only intended for use in private
households, and not intended for commercial use.
The manufacturer accepts no liability for damages caused by
improper use.
Scope of delivery
After unpacking the product, check if the delivery is complete
and if all parts are in good condition. Remove all packaging
materials before use.
Please contact customer service if parts are missing or
damaged.
1 x Anemometer
3 x Batteries ( LR03/AAA)
1 x Instruction manual
Description of parts
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the product.
(Fig. A, B, F)
[1]
Vane
[2]
Temperature sensor
[3]
Display
[4]
Button: (on/off)
[5]
Button:
UNIT
(unit of measurement)
[6]
Button: (backlight)
HOLD
(freeze value)
[7]
Button:
MAX/MIN
(highest/lowest reading)
[8]
Indicator: (automatic power-off)
[9]
Indicator: (low battery level)
[]
Wind speed display
[]
Indicator:
H
(freeze value active)
[]
Temperature display
[]
Indicator:
SET
(settings)
[]
Indicator:
AVG
(average values)
2/3MAX
(two-thirds of max. values)
MAX
(max. values)
MIN
(min. values)
To Next Page
Loading...
Need help?
General
