Parkside PWT 11 A1 - Setting Spray Dispersion Angle

PWT 11 A1
GB
│
IE
│
11 ■
Setting the dispersion angle:
The two limiter clips 4 serve as a stop for the metal clip 5. The metal
clip 5 changes its pivoting direction as soon as it strikes against one
of the two limiter clips 4.
♦ Increase the distance between the two limiter clips 4 to increase
the dispersion of the water jet (see Fig. 6).
♦ Decrease the distance between the two limiter clips 4 to decrease
the dispersion of the water jet (see Fig. 7).
♦ Fold the metal clip 5 upwards so that the sprinkler unit 3 rotates
360° (see Fig. 8).
Fig. 6 Fig. 7 Fig. 8
IB_360872_PWT11A1_LB8.indb 11 04.02.2021 15:16:31