PWT 11 A1
GB
│
IE
│
13 ■
Activating the appliance
NOTE
► Complete all settings before switching on the appliance.
♦ Turn the sensor sensitivity controller r clockwise to switch the appli-
ance on.
♦ Activate the appliance by placing one hand in front of the motion
sensor 9. The LED briefly lights up red and a click can be heard.
The appliance is activated and the water valve has opened up.
The appliance is now ready for use.
♦ Switch on the water tap.
NOTE
► Switch off the tap before you move into the detection field of the
appliance.
Dismantling
♦ Switch off the water tap.
♦ Turn the sensor sensitivity controller r anticlockwise to level 0 to
switch the appliance off.
♦ Disconnect the garden hose from the garden hose connection z.
♦ Unscrew the sprinkler unit 3 in an anticlockwise direction from the
connecting piece 6.
♦ Unscrew the connecting piece 6 in an anticlockwise direction from
the main unit 8.
♦ Unscrew the main unit 8 in an anticlockwise direction from the
extension tube t.
♦ Unscrew the extension tube t in an anticlockwise direction from
the ground spike u.
IB_360872_PWT11A1_LB8.indb 13 04.02.2021 15:16:31
To Next Page
Loading...