Parkside PWT 11 A1 - Appliance Operation and Controls; Adjusting Water Jet Range and Pattern

PWT 11 A1
■ 10
│
GB
│
IE
Operation
NOTE
► Make sure the water tap is closed when you move into the detec-
tion area of the appliance.
Adjusting the water jet
You have two options when adjusting the water jet that comes out of
the sprinkler unit 3.
Adjusting the width:
♦ Press the locking lever 2 down and turn the rotary control 1 in
the MAX direction to increase the width of the water jet (see Fig. 5).
When you turn the rotary control 1 completely in the MAX direc-
tion, the appliance can spray water up to a distance of 11 metres
when operating at 4 bar.
♦ Press the locking lever 2 down and turn the rotary control 1
towards MIN to reduce the width of the water jet (see Fig. 5).
DISTANCE
MIN
MAX
Fig. 5
IB_360872_PWT11A1_LB8.indb 10 04.02.2021 15:16:27