Parrot BEBOP 2 FPV User Manual

11
ENGLISH
BEFORE GETTING
STARTED
Before use, refer to the Battery section in the
General Information section.
CHARGING THE BATTERY OF THE
PARROT BEBOP 2
1. Select the plug (provided) for your country and put it
on the charger.
2. Connect the supplied cable to the charger.
3. Connect the battery to the charger's cable, and then
plug the charger into the mains.
The warning light is red while charging and then
turns green when the battery is charged. The battery
charge time is approximately 80 minutes. Flying time is
approximately 30 minutes.
CHARGING THE BATTERY OF THE
PARROT SKYCONTROLLER 2
1. Take the adapter appropriate to your country and x
it on the charger.
2. Connect the charger cable to Parrot Skycontroller 2,
then plug the charger into the mains.

Parrot BEBOP 2 FPV Specifications

General

Brand	Parrot
Model	BEBOP 2 FPV
Category	Drones
Language	English