This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
POLO V
Using the plastic trim tools, unclip
the storage compartment cover
under the handbrake.
Using the plastic trim tools, unclip
the gear lever cover without
dismantling it.
Unscrew screws 7 and 8 under
the gear lever cover.
Unscrew screws 9 and 10 at the
top of the central console, pull
hard to unclip it, then remove it.
7
9
8
10
11 12
Unscrew screws 11 and 12 under
the air conditioning control.
Push to the bottom of its
housing raise it and remove it
from below.
7
8
9
10
11
12