Parrot CK3100 Series User Manual

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
POLO V
Finding an ACC wire
Using a guide, feed an electric
wire from under the steering
wheel to the air conditioning
control housing. Feed the wire to
the left into the fusebox housing.
Fit a 1.5 mm terminal and insert it
into one of the small fuse slots to
the left of the box (using a
multimeter, check that the +12V
supply is indeed controlled by the
ignition key).
Connect the +IGN using a male
round terminal to the blue wire
of the 84942 adapter in front of
the fuse holder or on the red
wire of the 86200 or
YY138CABL2 adapter.
1
3
2
Option 1: Via the fusebox (automatic air
conditioning)

Parrot CK3100 Series Specifications

General

Display	LCD
Voice Recognition	Yes
Phonebook Synchronization	Yes
Device Type	Hands-free car kit
Maximum Range	10 meters
Caller ID	Yes
Profiles	Hands-Free Profile (HFP), Headset Profile (HSP)
Noise Cancellation	Yes
Microphone	External microphone
Compatibility	Bluetooth-enabled phones
Mounting	Dashboard
Bluetooth Version	Bluetooth v2.0
Number of Contacts	1000