16
4. Tighten the holder on your smartphone.
5. Using your smartphone’s USB cable, connect your smartphone to the
Parrot Skycontroller 2’s USB port.
> The FreeFlight Pro application starts automatically.
You are connected.
USE THE PARROT COCKPITGLASSES
1. Connect your Parrot Skycontroller 2 to your drone.
2. Pull out the drawer on your Parrot Cockpitglasses.
3. Open the drawer.
4. Pass your smartphone’s USB cable through the opening in the
drawer.
5. Plug one end of your smartphone’s USB cable into the Parrot
Skycontroller 2 and the other end into your smartphone.
> The FreeFlight Pro application will launch automatically on
your smartphone.
6. In the FreeFlight Pro application, go to Fly & Film > Settings >
Display > FPV mode and press Enable.
> FPV mode launches on your smartphone.
To Next Page
Loading...
