You can pair up to ten devices. If you attempt to pair an eleventh phone,
the kit says «memory full». You must then clear the memory by holding
down both the red and green buttons for three seconds. Doing so also
clears all the contacts.
In case of malfunction, you can reboot the Parrot MINIKIT Neo. To do so,
press the red button while sliding the On / off button forward (as if you
were checking the battery level).
Make sure your phone is compatible with the Parrot MINIKIT Neo.
To do so, refer to the compatibility list of the Parrot MINIKIT Neo
available on our website.
If your phone is compatible with the Parrot MINIKIT Neo, make
sure you have the latest software version on your Parrot MINIKIT
Neo. To find out the software version of your Parrot MINIKIT Neo,
check the name by which it is seen by other Bluetooth devices.
To find out the latest software version available, download the
update file and consult the update procedure, refer to our
website.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
