Parrot SKYCONTROLLER User Manual

4 Before starting
Before starting
Note: For easy reading, iPhone®, iPad® and other compatible telephones or tablets are
referred to as 'smartphones' in the manual.
Charging the battery
1. Insert the plug converter corresponding to your country to the
transformer.
2. Plug the battery to the charger.
3. Plug the charger to the mains.
> The charger's led lights up in red when charging. Once the battery
is fully charged, the led turns green. The battery takes about 1 hour
to charge.
Installing the battery
1. Connect the battery to the Parrot Skycontroller power cable.
2. Insert the battery into the battery compartment.

Parrot SKYCONTROLLER Specifications

General

Interface	WiFi
Input type	-
Product color	Yellow
Brand compatibility	Parrot
Compatible products	Bebop Drone
Built-in display	No
Maximum range	- m
Number of devices supported	1
Wi-Fi	Yes
Other operating systems supported	Android

Weight and Dimensions

Weight	- g