Making a call
• To make a call via voice recognition:
1. Press the green button to launch the voice
recognition feature.
> The MKi9000 asks you the name of the contact you
want to call.
2. Say the name of the contact and the type of number
(«Work», «Cellphone»...) if there are several num-
bers associated to your contact.
> The call is automatically launched if the voice tag is
correctly understood.
> If it is not the case, a confirmation message is
asked by the kit. Confirm by saying “Yes” or “Call”.
At any time, press the red key to exit voice recognition
mode.
• To make a call manually:
1. Press the jog wheel to enter the main menu and
select Phonebook.
> You access the phonebook of the connected
phone.
2. Select a letter and push the jog wheel.
3. Once the contact chosen:
- Press the green key to call this contact;
- Use the jog wheel to choose between different num-
bers of the same contact.
• Hold down the green key of the MKi9000 for two seconds
to redial the last dialled number.
Using the MKi9000 while on a call
• Use the jog wheel during a call to adjust the communication
volume. The volume setting is saved for subsequent calls.
• During a call, if you want to continue the conversation on
your phone (private conversation), press the button of the
MKi9000.
• During a call, the MKi9000 allows you to send DTMFs to
manage your voice mail for example. To do so, press the
jog wheel to access the DTMF menu.
16
To Next Page
Loading...
Need help?
General
