Need help?Do you have a question about the Partex ProMark MK9 and is the answer not in the manual?
General| Printing Method | Thermal transfer |
|---|---|
| Operating Temperature | +15°C - +32.5°C |
| Weight | 2 kg |
| Connectivity | USB |
| Power Supply | AC 100-240V, 50/60 Hz |
| Printing Speed | 2 inches per second |
| Print Speed | 2 inches per second |
| Maximum Print Width | 12 mm |
| Supported Media Types | Heat shrink tube |
To Next Page
