Partner K950 Active - Table of Contents

English – 3
CONTENTS
List of Contents
Symbol explanation..................................................... 2
Safety instructions
Personal protective equipment....................................... 4
The power cutter’s safety equipment ...................... 4
Control, maintenance and service of the machine‘s safety
equipment............................................................................ 4
General safety instructions .............................................. 6
Transport and storage ......................................................... 6
Fuel safety ........................................................................... 7
General working instructions........................................... 7
Cutting ................................................................................. 7
Kickback .............................................................................. 8
Care and storage................................................................. 9
Cutting blades .................................................................... 10
General.............................................................................. 10
Abrasive blades ................................................................. 10
Diamond blades ................................................................ 11
What is what?
What is what on a power cutter? ....................................... 12
Assembly
Fitting the cutting head ...................................................... 13
Checking the drive shaft and flanges ................................ 13
Fitting the cutting blade ..................................................... 13
Fuel handling
Fuel mixture....................................................................... 14
Fuelling .............................................................................. 14
Start and stop
Start and stop .................................................................... 15
Maintenance
Adjusting the drive belt ...................................................... 16
Changing the drive belt ..................................................... 16
Carburettor ........................................................................ 17
Fuel filter............................................................................ 18
Air filter .............................................................................. 18
Starter................................................................................ 19
Spark plug ......................................................................... 20
Muffler................................................................................ 20
Cooling system .................................................................. 20
Daily maintenance ............................................................. 21
Weekly maintenance ......................................................... 21
Monthly maintenance ........................................................ 21
Technical Data
K950 Active ....................................................................... 22
Before using your new Power cutter
• Read the Operator’s Manual carefully.
• Check the assembly and adjustment of the cutting blade, see
chapter ”
Assembly ”.
• Start the engine and check the carburettor settings. See
chapter ” Maintenance ”, section ” Carburettor ”. When adjusted
correctly the cutting blade should not rotate when idling.
Setting the idling speed is described in the Operator’s
Manual. Adjust the speed according to these instructions. Do
not use the power cutter if the idling speed is not correctly
adjusted!
• Let your Partner dealer check the power cutter and carry out
essential adjustments and repairs.
WARNING!
Use of products which cut, grind, drill, sand or
shape material can generate dust and vapors
which may contain harmful chemicals. Know
the nature of the material being worked on
and wear appropriate dust mask or respirator
protection.
!
WARNING!
Under no circumstances should you modify
the original design of the power cutter without
approval from the manufacturer. Always use
genuine spare parts. Unauthorized
modifications or accessories may lead to
serious injury or death.
!