Partner RP-300 - Page 50

TITLE : RP-300/310
Page -49 -
[Name] Select justification
[Format] ASCII ESC a
n
Hex 1B 61 n
Decimal 27 97 n
[Range] 0≤ n ≤ 2,48 ≤ n ≤ 50
[Description] Aligns all the data in one line to the specified position
n selects the justification as follows:
n Justification
0，48 Left justification
1，49 Centering
2，50 Right justification
[Details] ·The command is enabled only when processed at the beginning of the
line in standard mode.
·If this command is input in page mode, the printer performs only internal
flag operation.
·This command has no effect in page mode.
·This command executes justification in the printing area.
·This command justifies the space area according to
HT, ESC $ or ESC ＼
[Default]
n = 0
[Example]
Left justification Centering Right justification
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ESC c 3 n