Need help?Do you have a question about the Partner RP-300 and is the answer not in the manual?
General| Print Method | Thermal line printing |
|---|---|
| Print Technology | Direct thermal |
| Print Speed | 250 mm/sec |
| Paper Width | 80 mm |
| Interface | USB, Serial, Ethernet |
Details printing method, dot density, direction, width, speed, and line spacing.
Details printer interface options including RS-232, parallel, and USB.
Covers RS-232 serial interface specifications.
Details Centronics parallel interface specifications and pin assignments.
Covers USB interface specifications and connection examples.
Shows diagrams for D-SUB 25 Female Serial and D-SUB Centronics Parallel ports.
Explains the drawer kick-out connector, pin assignments, and signal waveforms.
Defines Select bit-image mode command.
Defines Set printing area in page mode command.
Defines Print NV bit image command.
Defines Print bar code command.
To Next Page
