Partner RP-300 - GS k m d1...dk NUL; GS k m n d1...dn

TITLE : RP-300/310
Page -77 -
[Range]
n = 0, 1, 48, 49
[Description] selects a font for the HRI characters used when printing a bar code.
n selects the font from the following table:
n Font
0, 48 Font A (12 x 24)
1, 49 Font B (9 x 24)
[Details] ·HRI means Human Readable Interpretation.
·HRI characters are printed of the position specified by GS H.
[Default]
n = 0
[Reference] GS H, GS k
GS h n
[Name] Select bar code height
[Format] ASCII GS h
n
Hex 1D 6B
n
Decimal 29 104 n
[Range] 1 ≤
n ≤ 255
[Description] Select the height of the bar code.
n specifies the number of dots in the vertical direction.
[Default]
n = 162
[Reference] GS k