Partner RP-300 - STAR Emulation Default Setting; STAR Emulation When the Paper Width Is Changed; Printable Area for STAR Emulation

TITLE : RP-300/310
Page -7 -
<STAR Emulation default setting>
57.5±0.5mm
<58mm {2.28"} paper width model>
0.125mm
2.65mm
420 dots
2.35mm
52.5mm(dot #1-#420)
Figure 1.6.2 Printable Area for STAR Emulation (for Default Setting)
<STAR Emulation when the paper width is changed>
82±0.5mm
<82.5 mm {3.25"} paper width model>
0.141mm
1mm
1mm
640 dots
80mm(dot #1-#640)