TITLE : RP-300/310
Page -57 -
①The printing area width is extended to the right in NV bit image
mode
②If the printing area width cannot be extended by one line vertically,
the left margin is reduced to accommodate one line vertically.
·If the downloaded bit-image to be printed exceeds one line, the excess
data is not printed.
·This command feeds dots (for the height n of the NV bit-image) in
normal
and double-width modes, and(for the height
n
x 2 of the NV bit-image)
in
double-height and quadruple modes, regardless of the line spacing
specified by ESC 2 or ESC 3.
·After printing the bit image, this command sets the print position to the
beginning of the line and processes the data that follows as normal data.
[References] ESC *, FS q, GS/, GS v 0
To Next Page
Loading...
