To Next PageTo Next Page
Need help?Do you have a question about the Partner T280 and is the answer not in the manual?
General| Power type | Petrol |
|---|---|
| Engine displacement | 25 cm³ |
| Power | 0.8 kW |
| Engine Type | 2-stroke |
| Cutting Width | 43 cm |
| Shaft Type | Straight |
| Handle Type | Loop |
Explains the meaning of various symbols used in the manual and on the unit.
Guidelines for safe operation, including protective gear and alertness.
Safety measures for performing maintenance and ensuring the unit's condition.
Precautions for handling and storing fuel to prevent fire and explosion.
Instructions for safely transporting and storing the unit.
Information on potential health effects from prolonged vibration exposure.
Specific safety guidelines for operating the line trimmer attachment.
Safety precautions specific to operating the brushcutter attachment.
Safety guidelines for operating the hedge trimmer attachment.
Safety precautions for using the pole pruner attachment.
Safety warnings and instructions for operating the snow thrower attachment.
Step-by-step guide for attaching the trimmer line attachment to the unit.
Instructions for properly installing the safety shield and line limiter.
Guidance on positioning the assist handle correctly for safe operation.
Detailed instructions and warnings for safely fueling the engine with the correct mixture.
Instructions on how to safely shut down the engine and unit.
Step-by-step guide for starting the engine, including cold and warm starts.
Detailed steps for starting the engine from a cold state.
Instructions for starting the engine when it's already warm.
Procedure for starting the engine if it has become flooded with fuel.
Instructions on how to use the coupler for attaching accessories.
Steps to safely detach the trimmer or other optional attachments from the unit.
Guidance on securely attaching optional accessories to the unit.
Recommended stance and body positioning for safe and effective operation.
Method for advancing the trimmer line to maintain optimal cutting length.
Techniques and best practices for effective cutting with the trimmer line.
Procedure to inspect the unit for loose screws, nuts, and fasteners.
Guidelines for identifying and replacing damaged or worn components.
Steps for cleaning the unit and inspecting for damage after each use.
Instructions for cleaning the air filter to maintain engine performance.
Procedure for replacing the spark plug to ensure easy starting and better running.
Step-by-step guide for replacing the trimmer line.
Instructions for adjusting the carburetor for optimal engine performance.
Preparation steps for storing the unit at the end of the season.
Specific procedures for storing the engine for extended periods.
General storage recommendations for fuel and storage containers.
