Paslode F325R - Tool and Fastener Specifications; Operating Air Pressure

3
TOOL SPECIFICATIONS
MODEL NO. F325R (Part# 513000)
HEIGHT
12.9"
WIDTH
4.3"
LENGTH
12.3"
WEIGHT 5.9 lbs.
OPERATING PRESSURE 90 to 120 p.s.i. (6.2 to 8.3 bar)
FASTENER SPECIFICATIONS
TOOL AIR FITTINGS:
This tool uses a 3/8" N.P.T. male plug. The
tting must be capable of discharging
tool air pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
90 to120 p.s.i. (6.2 to 8.3 bar). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
NAIL LENGTH
2" - 3-1/4"
SHANK DIAMETER .113" - .131"
TOOL AND FASTENER SPECIFICATIONS
MAGAZINE TYPE 30 degree, Single Strip
3
TOOL SPECIFICATIONS
MODEL NO. F325R (Part# 513000)
HEIGHT
12.9”
WIDTH
4.3"
LENGTH
12.3"
WEIGHT 5.9 lbs.
OPERATING PRESSURE 90 to 120 p.s.i. (6.2 to 8.3 bar)
FASTENER SPECIFICATIONS
TOOL AIR FITTINGS
:
This tool uses a 3/8” N.P.T. male plug. The
tting must be capable of discharging
tool air pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
90 to120 p.s.i. (6.2 to 8.3 bar). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
NAIL LENGTH
2” - 3-1/4"
SHANK DIAMETER .113 - .131
TOOL AND FASTENER SPECIFICATIONS
MAGAZINE TYPE 30 degree, Single Strip